Component which protects the engine by preventing dust from entering the cylinders.
Vibration damping system which completely isolates the handles from the rest of the tool for maximum user comfort, even during prolonged use.
System which stops the blades when the collection bag is full.
Automatic oil pump with zero flow when idling
Actuated by means of the pinion, enables chain lubricant oil to be delivered only when cutting, thereby preventing waste and reducing pollution.
Recipient into which grass clippings are deposited. The width of the bag determines the collection capacity and the amount of time between emptying.
Bar and chain
These two components comprise the cutting apparatus of a chain saw: the toothed cutting chain slides along the guide bar.
Mechanical device which reduces friction in the wheels. Wheels mounted on bearings ensure consistently smooth running, even over the most uneven terrain.
A transmission system with helical gears which transfers movement to the cutting assembly, parallel to the ground, with suitable speed reduction.
Built to chop or shred vegetable matter, organic waste and leaves, transforming it into natural fertiliser.
Effective tools for tidying any area of leaves and shrubs.
Tools designed specially for clearing grass, scrub, bushes and small brambles.
Trademark identifying Emak engines which contribute to safeguarding the surrounding environment and which comply fully with applicable EURO 2 norms.
Mechanical part of internal combustion engines which blends air and fuel for injection into the combustion chamber.
Particularly useful for tending plants when a precise and deep cut is needed. The carving bar is specially designed for wood carving and sculpting.
Metallic enclosure which protects the engine components.
A device installed in the initial section of the exhaust system which drastically reduces the quantity of pollutants (carbon monoxide, hydrocarbons and nitrogen oxides) present in the combustion gases.
Mechanical motorised saws used for cutting, felling and limbing trees.
Used after every 30 minutes of operation, enables the chain tension to be adjusted by means of a screwdriver, without disassembling any components. The correct tension is achieved when the chain can be raised a couple of millimetres away from the guide bar.
Change Over system
System which enables the machine to be switched easily between the collection and mulching functions, by means of a handy lever.
Compression Wave Injection
Fuel injection method for two-stroke engines, whereby a compression wave is used to deliver a rich fuel mixture into the engine cylinder.
Part of the connecting rod-crank mechanism, e.g. the mechanism which enables alternate rectilinear motion to be transformed into continuous rotary motion.
A rotating mechanical shaft with a series of cranks which enables the movement of the connecting rods is transmitted to the power take-off.
The cutting width depends on the cutting deck of the machine, in relation to the expanse of the area to be cut.
The cylinder is the component used to create linear motion; the area in which the combustion process takes place.
Body of the lawnmower, can be made of plastic (propylene or ABS), steel or aluminium.
Reduces the compression ratio in the cylinder during start-up, allows simple and effortless starting.
On chain saws, this device regulates the maximum cutting depth of the chain.
Generates high-voltage current, which when it reaches the spark plug creates the spark which triggers combustion.
The dipstick, present in 4-stroke engines, is immersed in the oil and is used to check the level (MIN and MAX with graduated scale) and quality of the oil.
A drive belt is a mechanical transmission component looped over pulleys which is used to provide an elastic but solid link between two rotating shafts.
Motorised drills which are ideal for sinking holes of varying diameter to receive vines, plants, supports or lamp posts.
Enables smooth starting with no kickback.
Transmits movement to the cutting implement and also enables it to remain stationary at idling speed without having to stop the engine.
Container for storing fuel inside the machine.
Self-propelled ride-on machines ideal for cutting grass in large gardens, parks and public green spaces.
System which simplifies periodic replenishment of lubricant grease in the gearbox.
(180°, 90° clockwise and 90° anticlockwise) System which ensures maximum versatility of use, even close to walls.
Leverage system which enables the equipment to be kept under control.
For cutting hedges and shrubs, aesthetic trimming and protecting the health of plants.
Powerful machines which use a high-pressure water jet, ideal for cleaning outdoor spaces, cars or agricultural equipment.
A holding company, also known as a parent company, is a corporation, normally privately held, which owns stock in other companies.
A range of machines aimed at the home user, for tidying and cleaning the garden, cutting hedges and smallish trunks or stems, and DIY jobs in general. Characterised by lightweight and compact construction, to make the task of the operator that much simpler. Easy to start, easy to use and easy to maintain: these are the ideal tools for getting things done quickly and neatly around the home.
Inertia-activated chain brake
Stops the chain in the event of kickback. Activated manually by means of a lever, or automatically, when the front hand guard is pushed forward due to unexpected kickback.
This certification demonstrates that the organisation in question has a management system to keep the environmental impact of its activities under control, and that it is systematically committed to improving its activities in a consistent, effective and above all sustainable way.
Identifies a series of standards and guidelines developed by ISO, which proposes a quality management system, developed for managing corporate processes so that they are targeted toward improving the efficiency and effectiveness of the organisation in addition to the satisfaction of its customers.
Handgrip which enables the machine's cutting height to be altered.
Lateral chain tensioner
Device which simplifies chain tensioning.
Machines for cutting grass by means of a blade positioned underneath the machine, which can be set to different cutting heights. Can be used for small spaces or extremely extensive areas, depending on the needs of the operator.
Device which automatically cuts off the starter when the accelerator is fully throttled.
The differential is a device which enables two wheels to move at different speeds. Locking the differential prevents one of the two drive wheels from spinning in the event that it temporarily loses grip.
Logsplitters are specialist tools for preparing firewood: they cut logs into smaller pieces suitable for furnaces, open fires and stoves.
Machines designed for the treatment and disinfestation of crops, small plantations and nursery stock. They can spray liquid or dust.
Mixture of lubricant oil and fuel which is usually used in two-stroke engines. This mixture is important because it lubricates the mechanical components of the engine and provides a source of energy.
Cutting system which repeatedly chops up grass into fine particles and then scatters it evenly over the turf.
A combination system consisting of a single power unit and multiple attachments: brushcutter, trimmer, blower, hedgetrimmer and pruner.
Draws lubricant from the sump and sends it to pressurised components in the engine lubrication circuit.
Original accessories and spare parts
Quality mark identifying original Emak parts and accessories. Designed to the most stringent quality standards, these items guarantee smoother operation of the machine and longer service life.
Collaboration between two or more enterprises, regulated by a contract and centred on one or more shared or complementary projects, which involves a variable degree of integration between the members of the participating enterprises.
The moving component, housed inside the cylinder and connected by means of the gudgeon pin to the connecting rod, which forms a "mobile wall" of the combustion chamber.
Multi-functional lawnmower: discharge, collection and mulching (system which chops up clippings up into fine fragments, leaving it on the lawn. The clippings decompose and act as natural compost).
The power take-off or PTO consists of a connection at the back or front of the machine to which implements are attached.
Powerful professional class tools for cutting asphalt, concrete and metals.
Primer and Starter
Devices which facilitate cold starting of the engine. Specifically they enable the carburettor to be instantly filled with fuel ready for starting.
Can be push-type, for smaller areas, or self-propelled for larger areas.
Designed for pruning and limbing at elevated heights without having to use steps or mechanical lifts.
Quick Fit system
System which allows quick attachment and removal of the cutting deck and other accessories in just a few minutes, without the need for tools.
Ready Start system
System which activates and deactivates automatic starting.
Assembly used to transmit rotary motion with a reduction in the number of revolutions.
Patented quick-fit mechanism for Multimate which enables the operator to switch from one implement to another within seconds, without the need for tools.
Machines designed for preparing soil for grass seeding.
A component which rotates inside the stator and which transmits motion to electrical machines.
Safety Control system
Safety system on Multimate which stops the engine as soon as the operator tries to detach the implement from the drive unit.
Tools for eliminating moss and weeds from turf and for making cuts in the ground: this allows the soil to breathe and enables moisture and nutrients to reach the roots of the grass.
The special design of the air filter and corresponding mount reduces the need for maintenance.
Designed for the mechanised harvesting of olives and other fruit. Delivers a much higher level of efficiency than manual methods.
No-nonsense everyday tools for the busy professional, these are machines that stand out for the toughness of their components, high performance and matchless long-term durability. Specific materials used in construction guarantee unwavering quality even when tackling the most severe and lengthy of tasks, like forestry work and the clearance of uncultivated areas or scrub and undergrowth.
Tools for atomising substances for the targeted treatment of small plants, orchards, vegetable plots, etc..
SRS Safety Release system
Innovative quick release system allowing the operator to step away from the machine in an instant, for maximum protection and safety.
Starter rope handle
Handle connected to the recoil starter rope which is used to start the engine.
Total Stop system
System switches off the motor when the flow of water through the wash lance is shut off.
Solid and dependable, these are machines designed for heavy and frequent use in countryside environments: clearing overgrown and uncultivated areas, pruning and cutting firewood, crop irrigation and disinfestation tasks. Designed using solutions which are certain to ensure high work rates and maximum durability over time.
The set of components which transfer the power generated by the engine or motor to the wheels.
Self-propelled tracked vehicles for construction and agricultural duties involving the transportation of bulky and heavy loads on steep gradients or over rough terrain.
Machines used to trim or cut grass in places which cannot be reached by a lawnmower or garden tractor (such as around garden walls, ornamental plants, bushes, flowerbeds and fences).
Radius or diameter of the arc-shaped path travelled by the front wheels with the steering wheel turned full lock.
Variable speed control
System with enables the machine to operate over an infinite range of speeds, making it adaptable to any type of grass.
Vibration damping system which isolates the engine from the handles and the body of the machine, considerably reducing the vibrations transmitted to the user during operation so as to guarantee maximum comfort and easy handling.
Voltage and frequency
Ratings within which the power supply must operate for the use of electrical appliances.
Suitable for all private and professional irrigation needs, in agricultural or building applications.
Wheeled brushcutters/Flail mowers
Designed for use in overgrown areas for cutting down and removing long, thick grass, clearing undergrowth or mowing along verges and the banks of ditches.